• Effectively traps impurities from shoe soles for dirt and dust control
• Each mat has 30 numbered layers of tough dirt removing film
• Easy to use- pull off and discard
• Cases include 120 or 240 sheets - can last an entire project
• Use on low-pile carpet, tile, concrete, hard flat surfaces

• Diamond-Plate surface
• NFSI Certified
• Treated surface drains static electricity from personnel
• Protect sensitive equipment from damage or eliminate static annoyance
• Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-alikes
• Grounding snap is attached to the corner of each mat
• Available in UltraSoft 15/16" and Standard 9/16" thickness
• Made in the USA

• Treated surface drains static electricity from personnel
• Protect sensitive equipment from damage or eliminate static annoyance
• Grounding snap is attached to the corner of each mat (NOTE: Mat must be grounded with a ground cord; workers must wear Heel Grounder or shoes with conductive soles)
• 3/32in Overall thickness
• Need a different size? 1’ incremental lengths are available! Simply give us a shout out!

• Open grease resistant rubber best in lightly wet and slippery dry areas
• Grounding snap on each mat
• Safety ramps do not posses ESD properties
• U.S. PATENT NO. D882,293 S
• Tiles interlock securely and come apart on demand for reconfiguration
• EOS/ESD S7.1: 1x10^6-1x10^9 (meets ANSI/ESD 20.20 requirements)
• 3’x 3’(91x91cm) rubber tiles
• Overall thickness 5/8" (15.9 mm)

Learn more about ESD flooring and matting in our blog - ESD 101: Everything You Need to Know About ESD Mats, Flooring, and Work Surfaces.

• Treated surface drains static electricity from personnel
• NFSI Certified
• Protect sensitive equipment from damage or eliminate static annoyance
• Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-alikes
• Grounding snap is attached to the corner of each mat
• Available in UltraSoft 15/16" and Standard 9/16" thickness
• Made in the USA

• Specially formulated embedded scrim ensures rapid dissipation of static electricity
• NFSI Certified
• Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-alikes
• Grounding snap is attached to the corner of each mat
1/2in Overall thickness

• U.S. PATENT NO. D502,557; D520,650
• Anti-fatigue relief for standing workers in static sensitive applications
• EOS/ESD S7.1: 1x10^6-1x10^9 (meets ANSI/ESD 20.20 requirements)
• Use over conductive floor
• Positive Interlocking System prevents separation
• Easily replace single pieces or sections as needed to reduce costs
• Carbon impregnated TPO tiles provide maximum durability
• Overall thickness 7/8”
• Four ramp / edge style options are available including safety-yellow

Learn more about ESD flooring and matting in our blog - ESD 101: Everything You Need to Know About ESD Mats, Flooring, and Work Surfaces.

• Tiles interlock securely and come apart on demand for reconfiguration
• Cover large areas with ESD ergonomic flooring in minutes
• Each tile comes with grounding snap already installed
• Separate ramps and corners available
• U.S. PATENT NO. D882,293 S
• EOS/ESD: Dissipative range- 1x10^6 to 1x10^10
• 5/8” thick

Learn more about ESD flooring and matting in our blog - ESD 101: Everything You Need to Know About ESD Mats, Flooring, and Work Surfaces.

• Treated surface drains static electricity from personnel
• 5/32in Overall Thickness
• Protect sensitive equipment from damage or eliminate static annoyance
• Grounding snap is attached to the corner of each mat (NOTE: Mat must be grounded with a ground cord; workers must wear Heel Grounder or shoes with conductive soles)

• For use with all ESD and Conductive mats
• Velcro loop for easy attachment
• One size fits all

• Use with all ESD and conductive mats
• Solderless terminal
• Molded-in fastener has an integral one-megaohm resistor
• Conforms to 10mm snaps