• NFSI Certified
• Abrasion resistant
• 2X the resilience and 3X the life of look-alikes
• Maximized standing area
• Ultra 15/16in thickness with beveled edge
• Unique pre-bond bevel and lay-flat design prevent trip hazards

• Effectively traps impurities from shoe soles for dirt and dust control
• Each mat has 30 numbered layers of tough dirt removing film
• Easy to use- pull off and discard
• Cases include 120 or 240 sheets - can last an entire project
• Use on low-pile carpet, tile, concrete, hard flat surfaces

• Gritted surface delivers 60% more traction
• Abrasion resistant
• 2X the resilience and 3X the life of off-brand products
• Maximized standing area for anti-fatigue and ergonomic support
• 15/16" thickness
• Lay-flat design prevents trip hazards
• One foot incremental lengths are available
• NFSI Certified

• Perfect for workstations and standing height desks
• Premium Anti-Microbial sponge base
• Non-porous, Anti-Microbial surface
• Classic marble top colors
• Maximized standing area
• Lay-flat design for added safety

Learn more about Tile-Top anti-fatigue matting here.

• Diamond-Plate surface
• NFSI Certified
• Treated surface drains static electricity from personnel
• Protect sensitive equipment from damage or eliminate static annoyance
• Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-alikes
• Grounding snap is attached to the corner of each mat
• Available in UltraSoft 15/16" and Standard 9/16" thickness
• Made in the USA

• Perfect for healthcare workstations and standing height desks
• Available in four marble top colors & 100+ sizes

Learn more about Tile-Top anti-fatigue matting here.

• Tall wall sanitizing foot mat includes pliable 1/2" rubber scrapers on mat surface to dislodge contaminants from shoes and boots
• For best decontamination, shoe soles must be immersed for one minute
• Floor mat available with black or yellow safety border

View our full line of contamination control floor mats here.

• Lightweight design for frequent cleanings - low maintenance floor mat
• Suitable for areas with water and non-caustic liquid agents
• 1/2" thick GR (Grease Resistant) natural rubber material construction
• Unique molded-in beveled safety edges reduce trip hazards
• 1 year warranty

View our full line of contamination control floor mats here.

• Treated surface drains static electricity from personnel
• NFSI Certified
• Protect sensitive equipment from damage or eliminate static annoyance
• Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-alikes
• Grounding snap is attached to the corner of each mat
• Available in UltraSoft 15/16" and Standard 9/16" thickness
• Made in the USA

• Premium Anti-Microbial sponge
• Floor mats are perfect for workstations and standing height desks
• Non-porous, Anti-Microbial surface
• Maximized standing area
• Lay-flat design
• 1’ incremental lengths are available

• Best Nitricell Sponge
• NFSI Certified
• Ideal for welding areas, booths, and workstations
• Ignition point of over 500⁰ Fahrenheit
• Specially compounded SBR rubber surface
• Unparalleled customization to any shape or size
• Available in 7/8" (2.25 cm) and 9/16" (1.43 cm) thick

Learn more about welding matting and flooring solutions here.

• Specially formulated embedded scrim ensures rapid dissipation of static electricity
• NFSI Certified
• Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-alikes
• Grounding snap is attached to the corner of each mat
1/2in Overall thickness

• Perfect for healthcare workstations and standing height desks
• Non-porous, Anti-Microbial surface
• Premium Anti-Microbial sponge base
• Available in multiple marble top colors & sizes

Learn more about Tile-Top anti-fatigue matting here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Machine cut, pre-beveled edges prevent tripping
• Abrasion and chemical resistant surface
• 7/8” thickness
• Other colors available in blue, gray, and charcoal
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• USP 797 compliant after autoclaved
• Latex-Free, non-porous rubber compound
• 100% nitrile rubber
• Tested at 52 autoclave cycles – 120 degrees C @15 psi for 20 minutes with no deformation
• Overall thickness 1/2”

View our full line of contamination control floor mats here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 7/8”
• Other colors available in gray, black, and charcoal
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 7/8”
• Other colors available in blue, gray, and black
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• Cutting Fluid Resistant Rubber (CFR)
• Wet or oily work environments
• Lightweight
• High Performance
• Overall thickness 1/2" (16mm)
• Gray

Learn more about WorkSafe flooring and matting solutions here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 7/8”
• Other colors available in blue, black, and charcoal
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
• Other colors available in gray, charcoal, and blue
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• U.S. PATENT NO. D609,050
• 100% anti-microbial rubber for food and beverage production and processing
• Red / Terra Cotta
• Built in handles for easy removal and cleaning
• 1/2" thick
• Knob style under structure for superior drainage and support
• Quality made by Wearwell in the USA

Learn more about food production floor mats here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
Made in USA
• Other colors available in gray, charcoal, and black
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• NBR Rubber for petroleum based fluids
• Bright, built-in safety borders.
• Long-term comfort and value
• Overall thickness 5/8

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
• Other colors available in blue, gray, and black
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• Chemically resistant to common disinfectant solutions
• Ideal for sanitizing shoe soles and boots
• Use Standard height for shoes

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
• Other colors available in blue, charcoal, and black
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• Lay-flat design - Built-in trip prevention with beveled safety edges
• NFSI (National Floor Safety Institute) Certified
• Perfect mat for healthcare workstations and standing height desks
• 20% more standing area
• Anti Microbial (AM) surface delivers added abrasion and chemical resistance
• Meets the ASTM G21 standard for anti-microbial properties
• Premium Anti-Microbial sponge layer
• Available in multiple colors & sizes
• Trusted Wearwell Brand

Learn more about Tile-Top anti-fatigue matting here.

• Industrial tough and abrasion resistant
• Durable textured surface guards against slipping
• Knobbed under-side for better drainage
• Optional drainage slots allow run-off and aeration
• Choose Abrasive Coated version for 40% more traction and greater chemical resistance
• Good for covering grated walkways, mezzanines
• Helps guard against slips and falls
• Adds anti-fatigue support to walkways

• 20% more standing area
• Wearwell brand Lay-flat design - Built-in trip prevention with beveled safety edges
• Perfect mat for workstations and standing height desks
• Available in multiple colors & sizes
• Meets the ASTM G21 standard for anti-microbial properties
• Premium Anti-Microbial sponge layer
• NFSI Certified (National Floor Safety Institute)
• #1 Wearwell brand

Learn more about Tile-Top anti-fatigue matting here.